WolfVision VZ-C12³ Service Manual download pdf (Page 6)

#22 MENU key

Pressing MENU key activates the on-screen menu (see page 16).

#23 IMAGE TURN mode key

For picking up vertical (portrait) pages with higher resolution (see page 12).

#24 HELP/RESET key for on-screen menu (double function of MEMORY key No. 7)

While you are in the on-screen menu you can activate the on-screen help by pressing the HELP key.

Pressing this key for 2 seconds resets the selected menu item (see page 16).

#25 MENU NAVIGATION keys (double function of MEMORY keys No. 2, 4, 6 and 8)

For navigating through the on-screen menu (see page 16).

#26 PRESET keys (programmable settings)

For storing a preset, press one of the PRESET keys for more than 2 seconds. For recalling a preset, press

the PRESET key quickly (see page 9).

#27 MEM key

For displaying all pictures of the internal memory as 3x3 split image (see page 11).

#28 VZ key

For displaying live image of the camera (see page 11).

#29 S (AF) key

Pressing this key activates the Auto Focus (see page 9).

#30 Manual FOCUS keys

For focusing the picture (see page 9).

#31 LASER POINTER key

Important: Do not stare directly into the laser beam. This is hazardous for your eyes!

#32 ZOOM keys

Using the ZOOM keys also switches auto iris on again.

#33 USB key

For displaying all pictures of the USB memory as 3x3 split image and to start the View mode (see page 11).

#34 EXT key

Shows the signal of the external input, use the VZ key to display the live image again (see page 15).

#35 SNAPSHOT key

Pressing this key activates the SNAPSHOT function (see page 11).

#36 FREEZE key

Freezes the current image (see page 10).

#37 MEMORY keys 1 - 9

For saving and recalling pictures of the internal memory (see page 11).

#38 ENTER key (double function of MEMORY key No. 5)

Same function as the right Navigation key (MEMORY key No. 6) (see page 16).

#39 Manual IRIS keys (brightness adjustment)

When the IRIS keys are pressed, the Visualizer switches off the auto iris function. The next time the ZOOM

keys are used the auto iris is switched on again (see page 9).

For specialists: The behaviour of the iris can be changed in the on-screen menu.

The overall iris level can be changed in the on-screen menu (see page 16).

#40 POWER key

Pressing this key switches the unit on and off.

When switching on the unit, the Visualizer runs the power-on preset.

ONE PUSH AUTO FOCU

Keys on the IR-Remote Control

If you want to work with more than one Visualizer in the same room, the units should be set to different

infrared codes, in order to control them all individually (see page 21).

The IR code of the unit has to match the code of the remote control.

Different IR Codes

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

Comments to this Manuals

No comments

WolfVision VZ-C12³ Service Manual Page 6

Comments to this Manuals

Related products and manuals for Document cameras WolfVision VZ-C12³