WolfVision VZ-8plus User Manual download pdf (Page 8)

RESET OF ON-SCREEN MENU SETTINGS

All settings in the on-screen menu can be set back to the factory defaults. "Reset" is one

item in the on-screen menu. In case you can not read the menu on a screen you can also

set the unit back to the factory defaults by simultaneously pressing both ZOOM-keys on the

camera head (#10) and the Number 4 (back-arrow) key (#29) on the remote control.

If you only want to reset the item that is currently selected to the default setting, press the

Number 5 (#31) key for 2 seconds!

SWITCHING TO NEGATIVE, NEGATIVE/BLUE and

BLACK/WHITE

For standard use of the WolfVision Visualizer it is not necessary to go into the Visualizer's

menu and change settings. Inexperienced users should not make any adjustments there.

To enter the on-screen menu press the MENU-key (#28) for one second. Settings of the

Visualizer's basic functions and the built-in camera can be made here using the 4 select

keys (=the numerical keys with red arrows - #30). Please note that some basic settings in

the menu can only be changed you set the menu item "Format protect" to "OFF" first.

If you require more information on a function in the on-screen menu just set the cursor in the

respective line and press the HELP key (#31, This is a double function of the Number 5

key). Than a detailed description of this function appears on the screen. If you want to reset

the selected item to the default setting, just press the Number 5 key (#31) for 2 seconds!

The functions of the on-screen menu are not described in detail in this user manual as the

help menu is an integrated part of the Visualizer's software. The information you see on your

screen always belongs to the current Visualizer software (firmware).

The output image of the Visualizers can be switched from positive to negative in the

on-screen menu. In addition the background of a negative image can be switched to

blue for better readability of text. You can also switch between color and black and white

in the on-screen menu.

TIP: If you switch often to negative, negative/blue or black/white images you can

assign this function to one of the Preset keys (see page 7) in the on-screen menu.

ON-SCREEN MENU / ON-SCREEN HELP

The following chapters are for experienced users only:

EXTERNAL INPUT

A Computer can be connected to the External RGBHV input (#11) of the Visualizer.

With the Ext/Int switch (#26) a user can switch between the Visualizer and Computer

image to be displayed to the audience.

The signal from the computer is just looped through the Visualizer and is not processed

in any way. In order to avoid that your projector or monitor adjusts itself when switching,

it is recommended that you set the output of the computer to the same signal format

(SXGA, XGA or SVGA) and vertical frequency (75 or 60Hz) as the Visualizer. The default

output settings of the Visualizer is: XGA (1024x768) at 60Hz.

DVI-output: Please note that the image from the External RGBHV input (#11) can only be displayed on the analog

section of the DVI-output (#12) and not on the digital section of this output (see page10).

1 2 3 4 5 6 7 8 9 10

No comments

WolfVision VZ-8plus User Manual Page 8