7
Slide Drawer
Preset Function
Text Enhancement
camera
head
slide
First make sure that you remove any object from the working surface
(very important!). Then insert a slide in the slide drawer. The camera
automatically recognizes the slide and focuses on the slide.
In case the slide is out of focus:
- Make sure that the slide is firmly in place
- Make sure that the ZOOM is not in the maximum tele
position (=smallest picture). Use the ZOOM-keys (#10 or #20)
.
The VZ-8plus offers the possibility to store the current settings as a Preset and recall them
by just pressing one of the three PRESET keys (#21) on the remote control. For storing a
Preset just adjust every function as required and then keep one of the PRESET keys
pressed for more than 2 seconds. The on-screen menu tells you when the preset is stored.
When the Presets are stored as mentioned above, all current settings like zoom, focus, iris
etc. are stored. Contrary to this, a user also has the opportunity to assign only specific
functions such as "Negative", "Negative/Blue", "Black/White" etc. to a PRESET key. This can
be done in the on-screen menu of the Visualizer (see page 9).
IMPORTANT
For improving the readability of text, sketches or x-rays press the TEXT-key (#25). This mode
enhances the contrast of the picture. Please note that the colors are now darker than usual.
To switch off the Text Enhancement mode, press the TEXT-key again. While the Text
Enhancement mode is on, the message "TEXT MODE" is constantly displayed in the picture.
This should remind a user to switch off this mode when it is not needed anymore. The
constant display of the word "TEXT MODE" could be switched off in the on-screen menu of
the Visualizer (see page 9) however we do not recommend to do so. Because without this
message users may tend to open the IRIS, instead of pressing the TEXT-key, if the picture
appears to be too dark. This would cause a misadjusted picture.
White balance:
Correct white balance adjustment is important for true colors! The default white balance
setting when the VZ-8plus is shipped is "Auto Tracking". This means that the white balance
is continuously adjusted. If the colors appear to be wrong try to
However an "Auto Tracking" white balance can never be 100% correct.
.
For a more precise white balance adjustment use the "One Push" white balance. This can
be done by completely zooming in a white paper on the working surface and pressing the
LIGHT-key (#6) for 3 seconds. When the white balance is stored an on-screen message
appears. Setting a "One Push" white balance switches off the "Auto Tracking" mode and the
current white balance setting remains in the memory even when the unit is switched off.
When the lighting conditions change (e.g. different room light or sunlight) the white balance
should be readjusted!
For specialists:
If you work with negative transparencies and an external light box, use a blank (dark) piece of the negative film for
white balance adjustment!
move any object in the
picture.
The VZ-8plus can be switched between "Auto Tracking", "One Push" and "Manual" white balance
mode in the on-screen menu (see page 9)
(8 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals