WolfVision VZ-8light³ Service Manual download pdf (Page 11)

A computer can be connected to the External RGB input (#15) of the Visualizer. With the

EXTERN switch (#30 or #44) a user can switch between the Visualizer image and the image

of the external input to be displayed to the audience.

The signal from the computer is only looped through the Visualizer and is not processed in

any way. In order to avoid that your projector or monitor adjusts itself when switching, it is

recommended that you set the output of the computer to the same signal format and vertical

frequency as the Visualizer.

Please note that the image from the External RGB input (#15) can be displayed on the RGB output (#17) only.

1 - T.M.D.S. Data2- 9 - T.M.D.S. Data1- 17 - T.M.D.S. Data0-

2 - T.M.D.S. Data2+ 10 - T.M.D.S. Data1+ 18 - T.M.D.S. Data0+

3 - T.M.D.S. Data2/4 Shield 11 - T.M.D.S. Data1/3 Shield 18 - T.M.D.S. Data0+

4 - T.M.D.S. Data4- (*) 12 - T.M.D.S. Data3- (*) 19 - T.M.D.S. Data0/5 Shield

5 - T.M.D.S. Data4+(*) 13 - T.M.D.S. Data3+ (*) 20 - T.M.D.S. Data5- (*)

6 - DDC Clock 14 - +5V Power 21 - T.M.D.S. Data5+ (*)

7 - DDC Data 15 - Ground (return for +5V, 22 - T.M.D.S. Clock+

8 - Analog Vertical Sync (**) HSync and Vsync) 23 - T.M.D.S. Clock-

16 - Hot Plug Detect 24 - Analog Vertical Sync (**)

*...not used

**...not available

DVI PORT

Anti-theft device 2: table lock bolt

EXTERNAL INPUT - EXTERN

The Visualizer can be fixed with a , so that it can

not be stolen. Follow the instructions from the cable lock manual.

security cable T-bar lock (Kensington Lock)

Anti-theft device 1: T-bar lock

Pin 24

Pin 8

Pin 1

Pin 9

Pin 17

table

(sectional view)

washer 6.4/17x3

screw M6

115

[4 /

156

[6 /

Please note that the usable depth

of thread is 8mm, do not screw in

more than this.

The Visualizer can also be fixed onto a table with the

supplied table lock bolt in order to minimize the risk of theft.

The thread to fix the bolt is on the bottom of the unit.

Supplied accessories for anti-theft device (part number):

Socket head cap wrench 5mm (101684)

Screw DIN 912, M6x35 Zn (101689)

Screw DIN 912, M6x50 Zn (101690)

Washer DIN 125A 6.4/12x1.6 (101691)

Washer DIN 7349 6.4/17x3 (101692)

Assembly instructions VZ-8³ (101693)

washer 6.4/12x1.6

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Comments to this Manuals

No comments

WolfVision VZ-8light³ Service Manual Page 11

Comments to this Manuals

Related products and manuals for Document cameras WolfVision VZ-8light³