WolfVision VZ-3 User Manual download pdf (Page 6)

Power-on preset:

The power-on preset is automatically activated when switching on the unit.

The settings are: zoom size: approx. 20 x 15 cm (DIN A5), autofocus: on, auto iris: on.

As soon as the Power Indication LED stays green illuminated, you can start working with the Visualizer. The

behavior of the unit once the power has been supplied or after the POWER key has been pressed can be

changed in the unit's on-screen menu (see page 10).

Setting Up the Visualizer

The working surface of the Visualizer (#1) has a special crystalline white color, which is especially designed

for perfect reproduction of transparencies.

In the following cases, an optional lightbox is recommended:

- If the transparency is very dark

- If the transparency is very wavy and causes reflections

- If the room light causes reflections on a transparency

Working Surface

1. Remove cable cover.

2. Connect the power pack to the power-input (#8).

3. Connect your display device (projector, monitor, video

conferencing unit etc.) to the appropriate output of the

Visualizer (#5, RGB with adapter) and fasten the cable

tie.

IMPORTANT:

For choosing the right output setting please read the

detailed description on page 8!

4. Slide-in cable cover until it rasted.

5. Lift the arm upwards. The VZ-3 is switched on

automatically. (Alternative the Visualizer can be

switched on by pressing the POWER key.)

The optional whiteboard foil can be used for direct annotation with special whiteboard markers. WolfVision

offers spare whiteboard foils.

More information on at www.wolfvision.com/wolf/thirdparty.htmlmarkers and sponge cleaners

Whiteboard Foil

Position the objects onto the working surface by checking the connected monitor or projector monitor.

When reflections appear just switch off the built-in light and work with room light. Please note that

reflections can also be caused by general room lighting conditions.

Positioning on the working surface

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

No comments

WolfVision VZ-3 User Manual Page 6