Wolfvision VZ-9.4F User Manual User Manual download pdf (Page 23)

Connect the Visualizer to a Network

Wired Connection

Connect the Visualizer to the existing network with available DHCP-server and the Visualizer will set the IP

addresses according the DHCP information.

If a DHCP-server is unavailable, please set the addresses for IP, Subnet Mask, Gateway and Nameserver

manually to valid settings.

Wireless Connection - Visualizer acts as Access Point

The Visualizer can be set up to act as Access Point and notebooks, smartphones and tablets can be

connected directly.

Disconnect mains and connect the supplied WLAN USB dongle . Power the unit and select

”Access Point” in the on-screen menu Advanced Settings / Ethernet Settings / WLAN Settings. There you

can assign the channel used, SSID, IP address and Encryption. When all settings are completed, select

”Activate” to start the access point function and connect the desired third party devices.

to port (#24)

Hint: Always disconnect the unit from mains before connecting / disconnecting the WLAN USB-Dongle.

Wireless Connection - Visualizer acts as Client (Infrastructure)

The Visualizer can be setup to connect to an existing WiFi infrastructure.

Disconnect mains and connect the supplied WLAN USB dongle to port (#24). Power the unit and select

”Infrastructure” in the on-screen menu Advanced Settings / Ethernet Settings / WLAN Settings. There you

can assign the SSID, IP address (DHCP or manual) and Encryption. When all settings are completed,

select ”Connect” to connect to the existing infrastructure.

Hint: Always disconnect the unit from mains before connecting / disconnecting the WLAN USB-Dongle.

The Ethernet functionality of the Visualizer can be limited and the access can be protected with a password.

Select ”Security Settings” in the on-screen menu Advanced Settings / Ethernet Settings.

Input the valid admin password to change the settings to restrict the functionality of Ethernet. Also the

admin password can be changed afterwards.

Note the changed password! Only WolfVision can reset a forgotten admin password!

Default passwords are ”Password” for admin and guest.

Security

The Visualizer can be setup as FTP client for sharing videos.

Prepare Ethernet connection (wired or wireless) and select ”FTP Settings” in the on-screen menu

Advanced Settings / Ethernet Settings. There you can assign the server IP address, user name and

password. When all settings are completed, select ”Interval” to send current shown image content to the

FTP-server in the defined time interval.

The setting ”Transfer” allows sending of video files to the FTP server and automatic deleting of local files

after successful transfer.

FTP client

The and the to control the Visualizer through an external

device, such as a room control system that is used to integrate conference rooms.

LAN port (#28) USB device port (#26) can be used

The complete serial protocol can be found on our internet website under: www.wolfvision.com/support

Room Management Systems

Power over Ethernet plus (PoE+)

The LAN port of the Visualizer includes Power over Ethernet plus (PoE+) functionality. The necessary

power will be provided through the Ethernet cable, this way a separate power line and adapter can be

saved. The Visualizer is compatible with PoE+ power injectors or PoE+ switches according to the

IEEE 802.3at -2009 industry standard.

The PoE+ adapter used must meet the IEEE 802.3at -2009 industry standard. Adapters not meeting this

standard are not compatible with this Visualizer and may have damaging effects!

Power Classification: "High power Class 4 (12.95 to 25.50W)".

More information on PoE+-adapters at www.wolfvision.com (Products / Accessories)

(#28)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Comments to this Manuals

No comments

Wolfvision VZ-9.4F User Manual User Manual Page 23

Comments to this Manuals

Related products and manuals for Camcorders Wolfvision VZ-9.4F User Manual